CUBI-TRAC
Model 110
is a silver anodized 16 gauge aluminum track system expressly
designed to subdivide bed areas in hospitals, convalescent homes
and clinics.
The
track channel can be factory curved on a 12 inch radius to almost
any layout desired and is used interchangeably in ceiling mounted
and suspended installations.
The
two-wheeled carriers incorporate an exclusive "bumper- to- bumper"
feature which prevents the wheels of one carrier from impeding
the movement of adjoining carriers.
The carriers also are equipped with a combination swivel-hook
for increased durability and ease of operation. Carrier spacing
is 6 inches on center.
Go to Cubicle Components and Parts
CUBI-TRAC
Model 110-C
(CEILING MOUNTED)
The drawing indicates the track components used in a typical
ceiling mounted installation. The track channel should be
secured to the ceiling at 3 ft. intervals. Carriers are
spaced 6 inches apart and should be ordered by curtain width,
which is usually 10% greater than the track length. (Note:
CUBI-TRAC Model 110-C also is available in unspliced sections
with two or more curves at a slightly higher price.)
|
 |
 |
CUBI-TRAC
Model 110-S (SUSPENDED)
The drawing indicates the track components used in a typical
suspended installation. Suspension points should be spaced
a maximum of 6 feet apart. Carriers are spaced 6 inches
apart and should be ordered by curtain width, which is usually
10% greater than the track length. CUBI-TRAC Model 110-S
can be easily maneuvered around obstructions such as windows
and doors. (Un-spliced sections with two or more curves
are available at a slightly higher price.) |
|
