16 gauge extruded aluminum, anodized finish. Obtainable
in unspliced lengths up to 20ft. Approx. 7/8in. x 1 1/4in.
NO. 1101 SINGLE CARRIER 2 - I oz.
Carrier spacing: 6 in. Block supported from 2 nylon
wheels. Plated swivel and curtain hook for effortless
and quiet curtain movement.
Carrier width: Approx. 1/2in.
NO
1109 END STOP 2 - 1 oz.
Prevents carriers from slipping out of end of track.
NO.
1110 REMOVABLE END STOP I - 3 oz.
Permits easy replacement of carriers. Bolt prevents carriers
from slipping out of track end. Hook included for curtain
tieoff. Extends track by approx. 3/4 i n.
NO.
1124 SPLICING CLAMP I - 2 oz.
Anodized sleeve for joining and extending track sections
assuring proper alignment of track channels. 8 in. long.
NO.
1125 CURTAIN TIE-BACK I - I oz.
Chain constructed of nickel-plated brass prevents
billowing of curtain from track end
NO.
1126 DROP CHAIN 18" - 1 1/3 oz.
Extension chain 18 in. long constructed of nickel plated
steel. Used when ventilation space is required and mesh
top is not feasible. Other lengths available.
NO.
1127 PVC DROP STRIP 2 - I oz.
Extension strip 18 in. long constructed of PVC. Hole at
top slips over hook on carrier. Plated hook at bottom
for attaching curtain. Used in place of mesh for ventilation
at top of curtain.
CURVES
1167
1176
No.
1100 Channel bent to (curved on a) 12 in. radius. Obtainable
in unspliced lengths up to 20 ft. 90° and 45°
one-bend curves standard. Multiple bends and other angles
also available.
Typical
curves:
No.
1166 (8 ft. x 8 ft. 90°)
1 - 4 lb. No.
1167 (2 ft. x 2 ft. 90°)
1 - 1 lb.
No.
1168 (3 ft. - 6 in. 90°)
1 - 1 3/4 Ib.
No. 1176
(1 ft. - 6 in. x 1 ft . - 6 in. 45°)
1 - 12 oz.
NO.
1170 CEILING FLANGE 1 - 4 oz.
Constructed of heavy duty aluminum. For connecting Suspension
Tube to ceiling. Fasteners required to attach Flange to
ceiling. Hole on side of flange for securing Suspension
Tube.
