ADC's
versatile ceiling mounted I.V. Support Systems
feature precision-made components that are adaptable to a variety
of room conditions. The track is available either straight or
curved in unspliced lengths up to 20 feet. Adjustable or fixed
pendants may be used.Standard pendant length - 36 inches. To
facilitate the addition or exchange of carriers in various layouts,
ADC provides end stops and splicing clamps with removable gates.
Quality and versatility characterize every aspect of ADC's I.V.
Support Systems.
The drawings below indicate typical I.V. track layouts and the
component parts used in each. We will be happy to review your
plans and sketches and make suggestions concerning the appropriate
layout and equipment to use.
Components
and Parts
No.
1100 - IV Track Channel 1' - 4 oz.
16 gauge extruded aluminum, anodized finish. Obtainable
in unspliced lengths up to 20 feet. Curves are bent
on 12 inch radius. 90° standard; other angles available.
Approximately
1 1/4
inch wide x 1 inch high.
No.
1109 - IV End Stop 1 - 1 oz.
"U-shaped"
anodized aluminum end cap bolts to track channel. Prevents
carrier from slipping put end of track.
NO.
1110
- IV Removable End Stop 1 - 3 oz.
Anodized aluminum end cap securely fastens to top of track
channel. Removable gate permits easy insertion and removal
of IV.
carrier. Approximately 3 inches long.
No.
1124 - IV Splicing Clamp 1 - 3 oz.
Anodized aluminum sleeve for joining and extending track
sections assuring proper alignment of track channels.
Has removable track section in center for easy insertion
and removal of
IV.
carrier. 8 inches long x
1 3/8
inches wide x 1 inch high, with 2 inch removable track
section.
No.
1185 Carrier 1 - 4 oz.
Plated steel block supported from four nonconductive nylon
ball-bearing wheels. 180° twist lock with nylon washer.
Nonconductive "ram's horn" hook permits easy attachment
of IV.
Pendant. Approximately 1 3/4 inches long x 1 inch high
plus hook (overall height 3 3/4 inches).
No.
11862 - IV Pendant
No. 11863 - IV Pendant
1 - 2
3/8
lbs.
Non-adjustable pendant constructed of 3/8 inch diameter
chrome-plated steel with 5/16 inch diameter "ram's horn"
arms. Five bottle capacity. Standard height 24 inches
(No. 11862) and 36 inches (no. 11863).
No.
1187 Adjustable Pendant 1 - 2 3/4 lbs.
Vertically
adjustable at 2 inch increments. Can be raised simply
by grasping handle and pushing up. Push button lock
is released to lower bottle holder assembly. Fabricated
of 3/8 inch diameter chrome-plated steel with four 5/16
inch diameter steel "ram's horn" arms and a fifth hook
at the bottom. Push button lock housed in the
11/2
inch diameter x 4 inch long brushed aluminum handle.
Standard height 36 inches.
